|Max Drilling Capacity||4mm|
|Head Stroke Length||20mm|
|Motor Power||0.75KW/3000 RPM|
|Max. Spindle Speed||12,000 RPM|
|Head Movement||LM Guide with Ball Screw|
|Depth Control||By Lead Screw & Nut|
|Ball Screw Drive||Servo Motor|
|Swing Over Bed||136mm|
|Distance between Spindle center to Base||100mm|
|Machine Size (mm)||800L x 530W x 1300H|
Kasthuri Machine Builders manufactures SPM Deep hole Drilling machine with maximum capacity of 10mm X a depth of 150mm with multiple spindles. Normally for a deep hole drilling it takes long time to drill the component, our basic idea is to drill more than 2 or 4 components at the same time of drilling / machining. The whole head moves on LM guide ways for the movement accuracy. The drilling head drive is given through servo motors like CNC machines or VMC machines. The spindles of this machine are direct driven with timer pulley by AC induction motor. So the power loss in this machine is also saved.
As the deep hole drilling machine has only one axis the machine movement is controlled through PLC (Programmable Logical Control) and controlled through the MMI (Man & Machine Interface). We can control the movement of the drilling head by input the data's in the MMI with a semi skilled operator.
In the deep hole drilling machine, the feed, No. of peck cycles and the RPM ranges also varied. The multiple spindle in this machine will also improve the production. This is great advantage in this deep hole drilling machine is where you can replace the CNC machine and VMC machine, if you are using the machine only for drilling purpose.
The drilling head of the Deep hole drilling machine is tested for its best performance. It is perfectly suitable for mass production and second operation drilling single or multi holes after machining in CNC lathes and machining centers. The deep hole drilling machine gives you consistency in production and almost 70% reducing the labor cost. The machine has the robust construction
We can manufacture custom made deep hole drilling and custom made drilling / tapping machines according to your specification / drawing
The drilling head of the Deep hole drilling machine is tested for its best performance. It is perfectly suitable for mass production and second operation drilling single or multi holes after machining in CNC lathes and machining centers. Consistency and almost 70% reducing the labor cost. The machine has the robust construction.