Multiple Spindle Drill Heads
Multi Drill Head with Self Feeder
Multi spindle head are well designed for almost all types of drilling and tapping machines. Multi spindle heads will increase your production as many spindle you increase and components in one fixture and the type of operation done like drilling, tapping, countersink, reaming and burnishing. Multi spindle heads are the best method to do drilling and tapping when the holds are close.
This can be divided into two Adjustable Multiple Spindle Drilling Heads and Fixed distance or Special Purpose Drilling Heads
Adjustable multi-spindle drilling heads can be used in many components, where you can change the center distance to some range.It will increase your drilling capacity in single special purpose machine.
Adjustable and fixed distance multiple spindle heads with the adapters to fit manual, automatic and fixture type drilling machines. Our multiple spindle heads are high quality and priced to be affordable. The spindle and gears are hard and ground for its best performance. Adjustable Multiple spindle heads for drilling and tapping can be supplied immediately but Fixed distance or special purpose has to be designed and manufactured. this can take three to four weeks of time with suitable adapters. are machined in about two weeks. Multiple Spindle heads are sometimes referred to as: cluster drills, tandem drills, or gang drills. Multi spindle drill heads is made up of Aluminum casting which is precisely machined. All rotating parts are hardened and ground. Change over of PCD of the spindle can be set easily and accurately by jigs. Spindle run on needle and thrust bearings. Drill revolution is usually identical with machine rpm, it may also vary according to drilling requirement.
| Multiple Spindle Drill Head Models |
|---|
| EV-2 - D66-168 |
| EV-3 - D66-168 |
| EV-4 - D66-168 |
| LCV-4 - D96-230 |
Multi Spindle Drilling head 2 Spindle
| TYPE | Drill | Tap | PCD | |
| MM | MM | Min | Max | |
| Multi Spindle drilling head KMB- 2SP-2 | 2 | 15 | 75 | |
| Multi Spindle drilling head KMB- 2SP-5 | 5 | 22 | 110 | |
| Multi Spindle drilling head KMB- 2SP-8 | 8 | M6 | 42 | 160 |
| Multi Spindle drilling head KMB- 2SP-10 | 10 | M8 | 66 | 168 |
| Multi Spindle drilling head KMB- 2SP-12 | 12 | M10 | 80 | 200 |
| Multi Spindle drilling head KMB- 2SP-14 | 14 | M12 | 90 | 226 |
Multi Drill head 3 Spindle Adjustable
| TYPE | DRILL | TAP | PCD | |
| MM | MM | MIN | MAX | |
| Multi Spindle drilling head KMB-3SP-8 | 8 | M6 | 52 | 168 |
| Multi Spindle drilling head KMB-3SP-10 | 10 | M8 | 66 | 168 |
| Multi Spindle drilling head KMB-3SP-12 | 12 | M10 | 80 | 200 |
| Multi Spindle drilling head KMB-3SP-14 | 14 | M12 | 90 | 226 |
Multi Drill head 4 Spindle Adjustable
| TYPE | DRILL | TAP | PCD | |
| MM | MM | MIN | MAX | |
| Multi Spindle drilling head KMB-4SP-8 | 8 | M6 | 66 | 168 |
| Multi Spindle drilling head KMB-4SP-10 | 10 | M8 | 72 | 168 |
| Multi Spindle drilling head KMB-4SP-12 | 12 | M12 | 80 | 200 |
Multi Spindle drilling head with cluster plate Soft Mat
| TYPE | DRILL | TAP | PCD | |
| MM | MM | MIN | MAX | |
| Multi Spindle drilling head 2 spindle CCDSM36 | 6 | M8 | 24 | 80 |
| Multi Spindle drilling head 3 spindle CCDSM36 | 6 | M8 | 28 | 80 |
| Multi Spindle drilling head 4 spindle CCDSM36 | 6 | M8 | 70 | 80 |
| Multi Spindle drilling head 2 spindle CCDSM42 | 8 | M10 | 25 | 108 |
| Multi Spindle drilling head 3 spindle CCDSM42 | 8 | M10 | 30 | 104 |
| Multi Spindle drilling head 4 spindle CCDSM42 | 8 | M10 | 65 | 104 |
| Multi Spindle drilling head 5 spindle CCDSM42 | 8 | M10 | 90 | 104 |
Multi Spindle drilling head with cluster plate Medium hard Mat
| TYPE | DRILL | TAP | PCD | |
| MM | MM | MIN | MAX | |
| Multi Spindle drilling head 2 spindle CCDMM32 | 10 | M12 | 30 | 85 |
| Multi Spindle drilling head 3 spindle CCDMM32 | 10 | M12 | 55 | 85 |
| Multi Spindle drilling head 4 spindle CCDMM32 | 10 | M12 | 80 | 85 |
| Multi Spindle drilling head 2 spindle CCDMM42 | 10 | M12 | 30 | 110 |
| Multi Spindle drilling head 3 spindle CCDMM42 | 10 | M12 | 35 | 110 |
| Multi Spindle drilling head 4 spindle CCDMM42 | 10 | M12 | 80 | 110 |
| Multi Spindle drilling head 2 spindle CCDMM54 | 12 | 30 | 130 | |
| Multi Spindle drilling head 3 spindle CCDMM54 | 12 | 35 | 130 | |
| Multi Spindle drilling head 4 spindle CCDMM54 | 12 | M14 | 42 | 130 |
| Multi Spindle drilling head 5 spindle CCDMM54 | 12 | M14 | 100 | 130 |
| Multi Spindle drilling head 6 spindle CCDMM54 | 12 | M14 | 115 | 130 |
| Multi Spindle drilling head 7 spindle CCDMM54 | 12 | M14 | 120 | 130 |
| Multi Spindle drilling head 8 spindle CCDMM54 | 12 | M14 | 125 | 130 |
Multi Spindle drilling head with cluster plate heavy duty material
| TYPE | DRILL | TAP | PCD | |
| MM | MM | MIN | MAX | |
| Multi Spindle drilling head 2 spindle CCDHD32 | 12 | M14 | 60 | 100 |
| Multi Spindle drilling head 3 spindle CCDHD32 | 12 | M14 | 90 | 100 |
| Multi Spindle drilling head 2 spindle CCDHD42 | 12 | M4 | 60 | 175 |
| Multi Spindle drilling head 3 spindle CCDHD42 | 12 | M4 | 70 | 175 |
| Multi Spindle drilling head 4 spindle CCDHD42 | 12 | M14 | 130 | 175 |
| Multi Spindle drilling head 5 spindle CCDHD42 | 12 | M114 | 160 | 175 |
Multi Spindle drilling head with cluster plate Compound gears
| TYPE | DRILL | TAP | PCD | |
| MM | MM | MIN | MAX | |
| Multi Spindle drilling head 2 spindle CCDCG30 | 8 | M10 | 42 | 120 |
| Multi Spindle drilling head 3 spindle CCDCG30 | 8 | M10 | 42 | 120 |
| Multi Spindle drilling head 4 spindle CCDCG30 | 8 | M10 | 42 | 120 |
| Multi Spindle drilling head 2 spindle CCDCG42 | 10 | M12 | 48 | 142 |
| Multi Spindle drilling head 3 spindle CCDCG42 | 10 | M12 | 48 | 142 |
| Multi Spindle drilling head 4 spindle CCDCG42 | 10 | M12 | 48 | 142 |
| Multi Spindle drilling head 5 spindle CCDCG42 | 10 | M12 | 48 | 142 |
| Multi Spindle drilling head 2 spindle CCDCG54 | 10 | M12 | 54 | 155 |
| Multi Spindle drilling head 3 spindle CCDCG54 | 10 | M12 | 54 | 155 |
| Multi Spindle drilling head 4 spindle CCDCG54 | 10 | M12 | 54 | 155 |
| Multi Spindle drilling head 5 spindle CCDCG54 | 10 | M12 | 54 | 155 |
| Multi Spindle drilling head 6 spindle CCDCG54 | 10 | M12 | 54 | 155 |
To know more details, please enter your Email ID: